CM 2400 Insulation Machine

cm2400

pdf Downloadable Specs
   

All-Fiber: Attic Blow, Dense-Pack (retro-fit) Sidewall, Wall Spray, Fireproofing

The 2400 series machine provides an economical, high production machine with low power requirements and reduced weight/size in your truck/trailer system. The simple design and minimal moving parts provide a machine that is low maintenance
and easy to repair.

This compact, robust machine with its various options, will outperform and out-last any machine in its class.

Material Production Rate/hr
Cellulose 3000 lbs*
Fiberglass 900 lbs*
Rockwool 1800 lbs
  • *16" airlock produces 3600 lbs./hr. cellulose (100 ft)
  • *16” airlock produces 1300 lbs./hr. fiberglass

Standard Features and Benefits

Mechanical

  • Large 15 cu./ft. hopper capacity fiber storage. (optional 30cu.ft. or 40 cu.ft extension hopper).
  • Stainless slide-gate and integrally mounted ‘pressure gauge’ provides precise fiber control.
  • High quality powder coating provides a long lasting corrosion resistant finish.
  • Modular design with see-thru access panels for quick troubleshooting and maintenance.
  • Slow speed positive feed ‘scalping’ augers extend component life, while increasing safety.
  • Large 12" X 12" (optional 16”), quick release airlock is a durable, easily serviced component.
  • High speed stainless turbo-shredder maximizes fiber conditioning, coverage, and production.
  • High torque (1250 in./lb.) motor/reducer drive provides surplus power.
  • #50 chain and hardened sprockets, are rugged, corrosion resistant, and positive driving.
  • Two integrally mounted 3-stage blowers w/check valve protection, outside air tube for reduced filter maintenance. (optional four blower or P.D. blower)
  • 150 ft. 3-function remote cord w/cord hanger, offers convenient handling of remote device.

Electrical

  • Safety Features: kill switch and manual override controls promote increased operator safety and quick hazard response.
  • ‘Panel’ mounted manual thermal overload protection of all motors and electrical components.
  • Deluxe voltmeter, L.E.D. ‘lighted’ plugs and receptacles for quick electrical diagnostics.

Weight: 720lbs (2-blower)

Dimensions: 58” L x 2” W x 48” H

Hopper Capacity

  • Main Hopper: 15 cu/ft (3 bags)
  • with Hopper Extension:
    • 30 cu/ft (6 bags)
    • 40 cu/ft (8 bags)

Airlock

  • 12” long x 12” diameter
  • 3” output for blowing hose
  • Slide-out airlock
  • Optional (12” long x 16” diameter airlock)

Blower

  • Two, 2-stage (12o volt 8amp)
  • Two, 3-stage (120 volt 12.5 amp)
  • Four, 3-stage (120 volt 12.5 amp)
  • 5 hp PD blower

Power Requirements

  • Double input, 20/30 amps. 120 volt. or
  • Single input, 30 amp. 240 volt. (two 3-stage blowers)
  • Single input, 40 amp. 240 volt. (four 3-stage blowers or 5 h.p. P.D. blower)

Generator Size Requirements

  • 8,000 watt (2-blower)
  • 15,000 watt (4-blower or 5 h.p. P.D. blower)

2400